Background

Advanced Engineering

Computational Fluid Dynamics (CFD)

SEDS offer CFD consultancy services to solve problems and challenges faced by industries during product design and development. We are uniquely positioned to find solution through understanding physical significance of the problem. We are committed to providing reliable solutions and support to our clients throughout our association.
The main aspects with a CFD simulation are verification and validation of the problem to provide accurate and significant solution. It can be achieved through experimental data, literature studies and analytical solutions. The expertise required is present with SEDS in the form of staff, software and support structure.

Capabilities

Ocean engineering

  • Vortex induced vibrations
  • Wave generation and propagation
  • Wave induced loads
  • Energy generation capability of prime movers

Ship Design

  • Ship resistance and propulsion
  • Sea keeping and maneuverability
  • Hull and trim optimization
  • Cavitation
  • Determine flow and performance characteristics of turbo machinery.
  • Methods like rotating reference frames and dynamic meshing are used.
Ship CFD,CFD,Ship Hydrodynamics,Resistance,Self-propulsion,Propulsion,Wind analysis,EEXI,EEDI,ESD,Energy saving device,Power curve,Speed power curve,Propeller curve,Open water characteristics,Numerical analysis,OpenFoam,Free surface,VOF,Actuator disk,Trim optimization,Hull optimization, CFD Kochin, CFD Kerala, CFD India, CFD All Ships,Computational Fluid Dynamics (CFD),Computational Fluid Dynamics, Marine Hydrodynamics,Turbo Machinery,Pipe Flow Analysis,Advanced Flow Problems,Thermal Analysis,Ocean engineering,Pressure drop estimation,Flow pattern,Turbulence and mixing flow, Multiphase flows, Multi-physics coupling, cfd-Kochi, Fluid Flow Analysis Computational Fluid Dynamics (CFD), SEDS CFD,CFD SEDS, Marine Designers CFD, Marine CFD, cfd, CFD Bahamas
  • Pressure drop estimation
  • Flow pattern
  • Turbulence and mixing flow
  • Compressible and incompressible flows
  • Steady and Transient
  • Multiphase flows
  • Multi-physics coupling
advanced-flow image
  • Heat exchangers
  • Conduction, convection and radiation
Ship CFD,CFD,Ship Hydrodynamics,Resistance,Self-propulsion,Propulsion,Wind analysis,EEXI,EEDI,ESD,Energy saving device,Power curve,Speed power curve,Propeller curve,Open water characteristics,Numerical analysis,OpenFoam,Free surface,VOF,Actuator disk,Trim optimization,Hull optimization, CFD Kochin, CFD Kerala, CFD India, CFD All Ships,Computational Fluid Dynamics (CFD),Computational Fluid Dynamics, Marine Hydrodynamics,Turbo Machinery,Pipe Flow Analysis,Advanced Flow Problems,Thermal Analysis,Ocean engineering,Pressure drop estimation,Flow pattern,Turbulence and mixing flow, Multiphase flows, Multi-physics coupling, cfd-Kochi, Fluid Flow Analysis Computational Fluid Dynamics (CFD), SEDS CFD,CFD SEDS, Marine Designers CFD, Marine CFD, cfd, CFD Bahamas Ship CFD,CFD,Ship Hydrodynamics,Resistance,Self-propulsion,Propulsion,Wind analysis,EEXI,EEDI,ESD,Energy saving device,Power curve,Speed power curve,Propeller curve,Open water characteristics,Numerical analysis,OpenFoam,Free surface,VOF,Actuator disk,Trim optimization,Hull optimization, CFD Kochin, CFD Kerala, CFD India, CFD All Ships,Computational Fluid Dynamics (CFD),Computational Fluid Dynamics, Marine Hydrodynamics,Turbo Machinery,Pipe Flow Analysis,Advanced Flow Problems,Thermal Analysis,Ocean engineering,Pressure drop estimation,Flow pattern,Turbulence and mixing flow, Multiphase flows, Multi-physics coupling, cfd-Kochi, Fluid Flow Analysis Computational Fluid Dynamics (CFD), SEDS CFD,CFD SEDS, Marine Designers CFD, Marine CFD, cfd, CFD Bahamas

OpenFOAM basic training (1 day - 8 hrs)

Learn to run different types of CFD simulations, set the boundary conditions and parameters for calculations, prepare computational meshes and evaluate the results.

  • what is OpenFOAM?
  • basic installation procedure in Windows and linux
  • grid generation - blockMesh
  • case setup - initial and boundary conditions
  • parallel computing
  • results evaluation using OpenFOAM and ParaView
  • advanced grid generation - snappyHexMesh
  • boundary conditions and solvers in OpenFOAM
  • turbulence modelling
  • modelling of rotation, moving meshes, multiphase flows
  • advanced postprocessing, convergence monitoring

Turbulence training (0.5 day – 4 hrs)

the turbulence modelling methods are discussed aiming on their benefits and drawbacks.

  • RANS
  • URANS
  • DES
  • LES
  • DNS
  • Wall Functions
  • Low Re

Pre and post processing training (0.5 day – 4 hrs)

basic principles of pre-processing and post processing for OpenFOAM. Post processing will be done for some test case.

  • Salome/Rhino
  • Prepare CAD model
  • Geometry cleanup
  • OpenFOAM Meshing Process
  • Set OpenFOAM case
  • test cases
  • Paraview
  • Visualization and interpretation

Hydrodynamic test cases and support (3 – 4 days case dependent)

Focus will be on ship modelling, meshing and solvers

  • Resistance test case
  • Self-propulsion test case
  • Support for client case (time based on case setup)

Address

Smart Engineering & Design Solutions
(India) Private Ltd.

8C, Noel Focus, Seaport- Airport Road, Kakkanad, Kochi – 682037, Kerala, India.